Danfoss - Condition-based monitoring (CBM)
Optimising availability through new maintenance concepts
Danfoss's intelligent variable speed drives provide early warning of downtime by collecting, evaluating and storing data from sensors. Results are made available in the cloud or locally, for predictive maintenance. This improves performance, efficiency and uptime, extends component life and reduces complexity. Installation is easy: the controller learns automatically or the user performs an identification run.
Detecting wear early: monitoring mechanical vibrations
Detecting wear early is crucial to prevent mechanical problems. With a Danfoss variable speed drive and a vibration sensor, bearing wear, shaft alignment and imbalance can be monitored. By comparing sensor signals with internal signals, the inverter can quickly detect faults and provide information to prevent breakdowns. Maintenance can thus be planned while the plant remains in operation. Vibrations are monitored according to ISO standards for machine monitoring and diagnosis, allowing data to be compared with real operating conditions such as speed and load.
Detection of motor winding faults before motor failure
Early detection of motor winding faults prevents failure. Faults develop gradually and start with small short circuits and heating. Often, damage goes unnoticed until overcurrent protection shuts down the installation. Continuous state monitoring of the motor by electrical signature analysis prevents this. Analysis of currents and voltages identifies motor and application faults such as shaft alignment and stator winding. Existing current and voltage sensors in AC drives generate valuable information at no extra cost. This prevents failure in an effective and cost-efficient way.
Load curve monitoring: early detection for pump fouling, among other things
When a Danfoss variable speed drive detects a heavier load, this indicates contamination and the drive triggers a maintenance alarm. Quick cleaning measures thus prevent bigger problems and keep the plant operational. The AC drive uses current and voltage measurements to control the motor. Parameters such as motor power, energy, speed and torque are calculated and used to monitor motor load. This allows analysis of the load curve and detection of any abnormalities, such as pump fouling.
Learn more about Condition Monitoring with Intelligent Frequency Controllers in the whitepaper click here.
Want to see real-life examples? Click here for a case study on CBM at HEINEKEN Den Bosch.
Stay up to date with the latest news:
-
Eaton - RMQ-Titan Advanced Indicator - Solution for visual status display in industrial applicationsRead moreWith its robust design and improved functionality, the RMQ-Titan Advanced Indicator meets the highest standards of reliability and ease of use.
-
TURCK Automation Suite (TAS) simplifies IIoT for any technical installationRead moreWith its robust design and improved functionality, the RMQ-Titan Advanced Indicator meets the highest standards of reliability and ease of use.
-
Weidmüller - Cubeseries relay modulesRead moreWeidmüller's Cubeseries relay modules have been developed for reliable switching, system decoupling and signal multiplication in various industrial environments. Thanks to their robust design, compact form factor and flexible connection techniques, they are suitable for both standard machines and more demanding process installations.
-
Rittal - New F-gas RegulationRead moreThe new European F-gas Regulation (EU) 2024/573 has been in force since 11 March 2024 and will be phased in gradually from 1 January 2025. The regulation is an important pillar of the European climate strategy and has one clear goal: to drastically reduce emissions of fluorinated greenhouse gases and ultimately phase them out completely by 2050. This has far-reaching consequences for the choice, use and future availability of refrigerants in industrial refrigeration and air conditioning systems.
Check out our other success stories:
-
Plukon - Scanning for the futureRead moreThe Plukon poultry slaughterhouse in Blokker has installations from all kinds of machine builders and suppliers. Each of these has its own control system and associated components from different brands. This situation has developed over time, with the result that Plukon lost track of the overall picture. When it became clear that many components were now obsolete, the company decided to have itsme carry out a FactoryScan. ‘This gives us more peace of mind and helps us to better plan the replacement of components for the future.’
-
Silmaco - Site assessmentRead moreKemira Rotterdam produces hydrogen peroxide in various grades at its Europoort site for applications such as water purification, cleaning beverage packaging and bleaching paper. As is customary in the process industry, the installation was lit 24/7 for safety reasons. Kemira felt that there was a smarter way to do this. That is why the company contacted itsme Lighting Technology. ‘In addition to saving energy, we are now also saving on maintenance.’
-
Kemira - Smart lighting for the process industryRead moreKemira Rotterdam produces hydrogen peroxide in various grades at its Europoort site for applications such as water purification, cleaning beverage packaging and bleaching paper. As is customary in the process industry, the installation was lit 24/7 for safety reasons. Kemira felt that there was a smarter way to do this. That is why the company contacted itsme Lighting Technology. ‘In addition to saving energy, we are now also saving on maintenance.’
-
Damen - Modbus on boardRead moreAt Damen Shipyards Group, field service engineers fly all over the world to provide service and carry out repairs. In addition to mechanics and electronics, communication networks are becoming increasingly important, with Modbus as the standard protocol. To brush up on their people's knowledge, Damen went in search of Modbus training. The shipbuilder chose itsme because of the customisation and flexibility that the industrial service provider could offer. ‘Nowhere else could we find this level of expertise.’ Translated with DeepL.com (free version)
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch