Schneider Electric - Simplified Wiring
In One Click!
Thanks to intuitive spring terminals, TeSys Deca Snap-In allows the connection of contactors and motor circuit breakers in just two seconds per wire. That is up to 96% faster than traditional connection methods.
The New Generation of TeSys Deca with Snap-In Technology
With the innovative Weidmüller Snap-In technology, Schneider Electric takes a revolutionary step in motor management and electrical installations. The new generation of (auxiliary) contactors and motor circuit breakers combines speed, simplicity, and reliability in a single solution. TeSys Deca Snap-In perfectly addresses today’s challenges, such as the shortage of skilled labor and the need for more efficient installation methods.
Tool-Free Connection
Conventional screw connection techniques are time-consuming. Spring and push-in terminals are faster, but not always suitable for untrained personnel, robotics, or all types of cables.
The innovative Snap-In technology ensures a quick and incredibly user-friendly installation that requires no tools and can be performed with just one hand, in only two seconds per wire.
Products from the TeSys Deca Snap-In range are delivered with a preloaded spring terminal. Once the wire touches the stop, the spring releases, and the wire is automatically clamped. The Snap-In terminals provide visual, tactile, and audible feedback with a clear click when the conductor is correctly connected. This guarantees an error-free and safe installation, even by less experienced technicians.
Maintenance-Free and Robust
The robust spring terminals are shock- and vibration-resistant and exert such strong pressure that the contacts do not loosen and never need retightening. This increases reliability and efficiency in demanding environments. Users can rely on an electrical connection that prevents wiring errors, even under extreme conditions. This avoids lengthy maintenance or even downtime caused by loose connections.
Ready-to-Robot
The innovative Snap-In terminal block has been specially designed for an automated future and is therefore "Ready-to-Robot." Thanks to this concept, collaborative robots such as Schneider Electric’s Lexium Cobot can carry out wiring independently, paving the way for fully automated assembly and wiring. The robotic arm only needs to insert the wire into the correct opening. With clear audiovisual feedback during insertion, a robot equipped with the right sensors can ensure an optimal contact connection.
Simpler, Faster, and Safer
With TeSys Deca Snap-In, you choose a future-proof solution that drastically reduces installation time, minimizes errors, and is durable and reliable. Whether you work in machine building, industrial automation, or building management, these contactors are designed to make your job simpler, faster, and safer.
Stay up to date with the latest news:
-
Schneider Electric - Signal columns XV4, XV6 and XVB7Read moreCompanies are under constant pressure to deliver smarter and more efficient solutions. Schneider Electric's new modular signal towers are designed to meet these requirements. The Harmony XV4, XV6 and XVB7 signal towers are suitable for a wide range of applications. These new modular ranges are available in 40 mm, 60 mm and 70 mm diameters.
-
Schneider Electric - Schneider Electric – Harmony Tower LightsRead moreThe comprehensive Harmony signaling range from Schneider Electric includes a variety of beacons, tower lights, and multi-tone sounders. These signaling devices feature status indication, voice guidance, and configurable light and sound patterns to provide timely alerts for faults and abnormal conditions. They are known for easy installation, low maintenance, and high protection rating.
-
Schneider Electric - New offer Soft StartersRead moreWith the introduction of the new Altivar Soft Starter ATS480 series in 2023 as a replacement for the Altivar ATS48, and the launch of the new Altivar Soft Starter ATS130 in 2024, Schneider Electric expands its Soft Starter portfolio once again in 2025 with the new ATS430 and ATS490.
-
Schneider Electric - Modicon Edge I/O NTSRead moreModicon Edge I/O NTS, Schneider Electric’s latest IP20 distributed I/O system, is more than just an input/output system. It is designed to equip machine builders, system integrators, and industrial end-users with the tools they need to thrive in an increasingly data-driven digital world. The system's ability to aggregate and securely share data enables smarter decision-making and improved operational performance. With open Ethernet protocols for connectivity with a wide variety of devices and architectures, OPC UA technology for secure communication and interoperability, and built-in hardware cybersecurity, Modicon Edge I/O NTS helps ensure connectivity, performance, availability, and enhanced network security. Furthermore, the system complies with current cybersecurity regulations, enabling end-users to safely access and fully leverage their data — boosting industrial efficiency, flexibility, sustainability, and profitability.
Check out our other success stories:
-
Plukon - Scanning for the futureRead moreThe Plukon poultry slaughterhouse in Blokker has installations from all kinds of machine builders and suppliers. Each of these has its own control system and associated components from different brands. This situation has developed over time, with the result that Plukon lost track of the overall picture. When it became clear that many components were now obsolete, the company decided to have itsme carry out a FactoryScan. ‘This gives us more peace of mind and helps us to better plan the replacement of components for the future.’
-
Silmaco - Site assessmentRead moreKemira Rotterdam produces hydrogen peroxide in various grades at its Europoort site for applications such as water purification, cleaning beverage packaging and bleaching paper. As is customary in the process industry, the installation was lit 24/7 for safety reasons. Kemira felt that there was a smarter way to do this. That is why the company contacted itsme Lighting Technology. ‘In addition to saving energy, we are now also saving on maintenance.’
-
Kemira - Smart lighting for the process industryRead moreKemira Rotterdam produces hydrogen peroxide in various grades at its Europoort site for applications such as water purification, cleaning beverage packaging and bleaching paper. As is customary in the process industry, the installation was lit 24/7 for safety reasons. Kemira felt that there was a smarter way to do this. That is why the company contacted itsme Lighting Technology. ‘In addition to saving energy, we are now also saving on maintenance.’
-
Damen - Modbus on boardRead moreAt Damen Shipyards Group, field service engineers fly all over the world to provide service and carry out repairs. In addition to mechanics and electronics, communication networks are becoming increasingly important, with Modbus as the standard protocol. To brush up on their people's knowledge, Damen went in search of Modbus training. The shipbuilder chose itsme because of the customisation and flexibility that the industrial service provider could offer. ‘Nowhere else could we find this level of expertise.’ Translated with DeepL.com (free version)
Why not take a look at these trainings we offer:
-
PROFINET CPNERead moreavailable in Dutch
-
PROFIBUS CPERead moreavailable in Dutch
-
WinCC-SCADA2Read moreavailable in Dutch
-
PCS7-SAFE V9Read moreavailable in Dutch